IBM HC10 Service Guide - Page 44
Removing, graphics
![]() |
UPC - 883436017671
View all IBM HC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removing a graphics card To remove a graphics card, complete the following steps. Graphics card Release latch 1. Read the safety information that begins on page vii and "Installation guidelines" on page 13. 2. If the blade workstation is installed in a BladeCenter unit, remove it (see "Removing the blade workstation from a BladeCenter unit" on page 16). 3. Remove the blade workstation cover (see "Removing the blade workstation cover" on page 19 for instructions). 4. Lift the release latch that secures the graphics card to the system board. 5. Slide the card away from the graphics-card connector; then, lift the card out of the blade workstation. 6. If you are instructed to return the expansion card, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. 28 BladeCenter HC10 Type 7996: Problem Determination and Service Guide
![](/manual_guide/products/ibm-hc10-service-guide-55048c8/44.png)