IBM HC10 Service Guide - Page 88

solved.

Get IBM HC10 - BladeCenter - 7996 PDF manuals and user guides
UPC - 883436017671
View all IBM HC10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, Type 7996," on page 11 to determine which components are CRUs and which components are FRUs. v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 110-600-001 I/O and Graphics Adapter: Failed 1. Turn off the blade workstation and reseat the blade workstation in the chassis. 2. Update the BMC firmware. 3. Reseat the compression card. 4. Replace the following components one at a time, in the order shown, restarting the blade workstation each time: a. Compression card b. (Trained service technician only) System board assembly 110-4xx-yyy I/O and Graphics Adapter: Aborted 1. Turn off the blade workstation and reseat the blade workstation in the chassis. 2. Update the BMC firmware. 3. Reseat the compression card. 4. Replace the following components one at a time, in the order shown, restarting the blade workstation each time: a. Compression card b. (Trained service technician only) System board assembly 165-060-000 Service Processor: ASM may be busy 1. Rerun the diagnostics test. 2. Correct other error conditions that might be keeping the Advanced System Management (ASM) network or components busy. See the error log and diagnostic panel. 3. Turn off the blade workstation and reseat it in the BladeCenter unit. 4. (Trained service technician only) Replace the system board assembly. 165-198-000 Service Processor: Aborted 1. Rerun the diagnostics test. 2. Correct other error conditions that might be keeping the Advanced System Management (ASM) network or components busy. See the error log and diagnostic panel. 3. Turn off the blade workstation and reseat it in the BladeCenter unit. 4. (Trained service technician only) Replace the system board assembly. 165-201-000 Service Processor: Failed 1. Power down blade workstation and reseat it in the chassis. 2. (Trained service technician only) Replace the system board assembly. 72 BladeCenter HC10 Type 7996: Problem Determination and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
v
Follow
the
suggested
actions
in
the
order
in
which
they
are
listed
in
the
Action
column
until
the
problem
is
solved.
v
See
Chapter
3,
“Parts
listing,
Type
7996,”
on
page
11
to
determine
which
components
are
CRUs
and
which
components
are
FRUs.
v
If
an
action
step
is
preceded
by
“(Trained
service
technician
only),”
that
step
must
be
performed
only
by
a
trained
service
technician.
Error
code
Description
Action
110-600-001
I/O
and
Graphics
Adapter:
Failed
1.
Turn
off
the
blade
workstation
and
reseat
the
blade
workstation
in
the
chassis.
2.
Update
the
BMC
firmware.
3.
Reseat
the
compression
card.
4.
Replace
the
following
components
one
at
a
time,
in
the
order
shown,
restarting
the
blade
workstation
each
time:
a.
Compression
card
b.
(Trained
service
technician
only)
System
board
assembly
110-4xx-yyy
I/O
and
Graphics
Adapter:
Aborted
1.
Turn
off
the
blade
workstation
and
reseat
the
blade
workstation
in
the
chassis.
2.
Update
the
BMC
firmware.
3.
Reseat
the
compression
card.
4.
Replace
the
following
components
one
at
a
time,
in
the
order
shown,
restarting
the
blade
workstation
each
time:
a.
Compression
card
b.
(Trained
service
technician
only)
System
board
assembly
165-060-000
Service
Processor:
ASM
may
be
busy
1.
Rerun
the
diagnostics
test.
2.
Correct
other
error
conditions
that
might
be
keeping
the
Advanced
System
Management
(ASM)
network
or
components
busy.
See
the
error
log
and
diagnostic
panel.
3.
Turn
off
the
blade
workstation
and
reseat
it
in
the
BladeCenter
unit.
4.
(Trained
service
technician
only)
Replace
the
system
board
assembly.
165-198-000
Service
Processor:
Aborted
1.
Rerun
the
diagnostics
test.
2.
Correct
other
error
conditions
that
might
be
keeping
the
Advanced
System
Management
(ASM)
network
or
components
busy.
See
the
error
log
and
diagnostic
panel.
3.
Turn
off
the
blade
workstation
and
reseat
it
in
the
BladeCenter
unit.
4.
(Trained
service
technician
only)
Replace
the
system
board
assembly.
165-201-000
Service
Processor:
Failed
1.
Power
down
blade
workstation
and
reseat
it
in
the
chassis.
2.
(Trained
service
technician
only)
Replace
the
system
board
assembly.
72
BladeCenter
HC10
Type
7996:
Problem
Determination
and
Service
Guide