Konica Minolta Fujitsu fi-7160 Operation Guide - Page 114
Brake roller, Pick roller, Plastic idler roller, Rubber idler roller, Glass, Ultrasonic sensor
View all Konica Minolta Fujitsu fi-7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Chapter 6 Daily Care 3 Clean the following locations with a cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe. Glass (× 2) Ultrasonic sensor (× 2) Brake roller (× 2) Feed roller (× 2) Eject roller (× 2) Document sensor (× 8) Pick roller (× 2) Plastic idler roller (× 2) Rubber idler roller (× 2) Brake roller (× 2) Remove the roller from the scanner. For details about removing the brake roller, refer to "7.2 Replacing the Brake Roller" (page 121). Gently wipe off any dirt or dust along the grooves, taking care not to damage the roller surface. TOP Contents Index Introduction Scanner Overview How to Load Documents Pick roller (× 2) Gently wipe off any dirt or dust along the grooves as you rotate the roller manually, taking care not to damage the roller surface. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance. Plastic idler roller (× 2) Gently wipe off any dirt or dust on the surface of the rollers. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance. Rubber idler roller (× 2) Gently wipe off any dirt or dust on the surface of the rollers. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance. When wiping, be careful not to damage the sponge that is attached to the middle of the rubber idler roller. Glass (× 2) Gently wipe the dirt and dust off the surface of the glass sections. ATTENTION Vertical streaks may appear on the scanned image when the glass is dirty. Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 114