Konica Minolta Fujitsu fi-7160 Operation Guide - Page 187

Chapter 9 Operational Settings Removing a Color from the Scanned Image [Dropout color] With "Dropout color", you can select either green, red, or blue (primary colors) to remove the details of the selected color from a scanned image. For example, when a document with black characters and a green background is scanned, only the black characters of the document can be scanned by selecting green for the dropout color. ATTENTION Dropout works the best with light (low intensity) colors, and dark colors may not drop out. HINT Dropout color is only available in black & white or grayscale mode. 1 Start up the Software Operation Panel. For details, refer to "9.1 Starting Up the Software Operation Panel" (page 163). 2 From the listing on the left, select [Device Setting 2]  [Dropout color]. 3 Select a color to drop out. Red, Green, Blue: The selected color is dropped out. None: No color is dropped out. ATTENTION The Software Operation Panel allows you to choose the color from red, green, and blue only. To drop out a color of your choice, configure the setting in the scanner driver. For details, refer to the scanner driver's Help. HINT This setting can also be configured in the scanner driver. Note that priority is given to the scanner driver setting. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 187