Konica Minolta Fujitsu fi-7160 Operation Guide - Page 182

Chapter 9 Operational Settings Scanner Cleaning Cycle [Cleaning Cycle] The cleaning cycle for the scanner can be specified. The background color of the cleaning counter (in [Device Setting]) turns yellow when the page count after cleaning is performed reaches 100% of the specified value. You can also display a cleaning instruction message (page 181). 1 Start up the Software Operation Panel. For details, refer to "9.1 Starting Up the Software Operation Panel" (page 163). 2 From the listing on the left, select [Device Setting 2]  [Cleaning Cycle]. 3 Specify a value for the cleaning cycle. The value can range from 1,000 to 255,000 sheets (in increments of 1,000). Specify whether or not to display the cleaning instruction message. Replacement Cycle of Consumables [Life Counter Alarm Setting] The replacement cycle for each consumable can be specified. The background color of the brake roller/pick roller counter (in [Device Setting]) changes to light yellow when the page count after replacing the consumable reaches 95% of the value specified here, and turns yellow when it reaches 100%. A message that prompts consumable replacement (page 181) also appears. 1 Start up the Software Operation Panel. For details, refer to "9.1 Starting Up the Software Operation Panel" (page 163). 2 From the listing on the left, select [Device Setting 2]  [Life Counter Alarm Setting]. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 182