Konica Minolta Fujitsu fi-7160 Operation Guide - Page 116
Scan/Enter] button, Close the ADF., Reset the cleaning counter.
View all Konica Minolta Fujitsu fi-7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Chapter 6 Daily Care 6 When you press the [Scan/Enter] button, the feed/eject rollers rotate a certain amount. Check Menu Stop/Clear Scan/Enter [Scan/Enter] button Power When you press the [Scan/Enter] button, the feed/eject rollers rotate at the same time. Be careful not to touch the rollers with your hand while they are rotating. 7 Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the roller surface, and wipe horizontally. Wipe off any dirt or dust on the surface by pressing the [Scan/ Enter] button to rotate the rollers. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance. As a guideline, pressing the [Scan/Enter] button seven times will rotate the feed/eject rollers one revolution. 4 Close the ADF. For details, refer to "1.4 Opening/Closing the ADF" (page 27). Be careful not to have your fingers caught when closing the ADF. ATTENTION Confirm that the ADF is closed properly. Otherwise, the document may not be fed into the ADF. 5 Reset the cleaning counter. Reset the counter by performing one of the following actions: Reset the counter in [4: Consumable counters] on the [Settings Menu] screen of the operator panel. For details, refer to "4.2 Settings Menu" (page 66). Reset the counter in the Software Operation Panel. For details, refer to "Resetting the sheet counters" (page 180). TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 116