Konica Minolta Fujitsu fi-7160 Operation Guide - Page 205

Chapter 9 Operational Settings 9.9 Settings Related to Scanner Maintenance Detecting Vertical Streaks [Vertical Streak Detection] Select whether to enable or disable vertical streak detection. After enabling this setting, flashes on the LCD when a vertical streak may occur in the images that are scanned through the ADF. [Clean glass!] also flashes on the second line in the [Ready] screen. Check the information, and then clean the glass. For details about checking the information, refer to "Checking the information" (page 71). For details about cleaning, refer to "Chapter 6 Daily Care" (page 108). 1 Start up the Software Operation Panel. For details, refer to "9.1 Starting Up the Software Operation Panel" (page 163). 2 From the listing on the left, select [Device Setting 2]  [Vertical Streak Detection]. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care 3 Select whether to enable or disable [Vertical Streak Detection]. When you select [Enable], the scanner detects vertical streaks (dirt on the glass) during scanning with the ADF. HINT This setting can also be configured in the operator panel. Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 205