Konica Minolta Fujitsu fi-7160 Operation Guide - Page 122
Protrusion, Shaft, Brake roller, Replacing the, Consumables
View all Konica Minolta Fujitsu fi-7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 7 Replacing the Consumables 5 Attach a new brake roller on the shaft. Insert the protrusion on the shaft into the slot. Brake roller Slot Protrusion Shaft 6 Attach the shaft. 1 Insert the left end of the shaft into the hole in accordance with the hole shape, and then attach the right side of the shaft. Shaft 2 1 Brake roller 2 Close the cover. ATTENTION Confirm that the brake roller is installed properly. Otherwise, it may cause feeding errors such as paper jams. 7 Close the ADF. For details, refer to "1.4 Opening/Closing the ADF" (page 27). Be careful not to have your fingers caught when closing the ADF. 8 Reset the brake roller counter. Reset the counter by performing one of the following actions: Reset the counter in [4: Consumable counters] on the [Settings Menu] screen of the operator panel. For details, refer to "4.2 Settings Menu" (page 66). Reset the counter in the Software Operation Panel. For details, refer to "Resetting the sheet counters" (page 180). TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 122