Kyocera 9530DN Operation Guide - Page 112
Setting the Duplex Path, Paper Thickness, Range
View all Kyocera 9530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Using the Operation Panel 3 Press [OK]. A blinking question mark (?) appears. >>Paper Weight ? Normal 1 4 Press U or V to display the desired paper thickness. The display changes as shown below. For details of the default setting for each paper type, refer to Media Type on page 1-13. Paper Thickness Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3 Extra Heavy Range Less than 64g/m2 64 to 75g/m2 75 to 90g/m2 90 to 105g/m2 105 to 135g/m2 135 to 170g/m2 Over 170g/m2 Transparency 5 When the desired paper thickness displayed, press [OK]. 6 Press [MENU]. The message display returns to Ready. Setting the Duplex Path You can set whether or not to enable duplex printing as follows. The default setting is Enable. 1 Display the custom paper type (refer to Creating Custom Paper Type on page 2-82) and press Z. 2 Press U or V repeatedly until >>Duplex Path appears. >>Duplex Path Enable 3 Press [OK]. A blinking question mark (?) appears. >>Duplex Path ? Enable 4 Select Enable or Disable using U or V. For details of the default setting for each paper type, refer to Media Type on page 1-13. 5 Press [OK]. 6 Press [MENU]. The message display returns to Ready. 2-84 ADVANCED OPERATION GUIDE