Kyocera 9530DN Operation Guide - Page 65
Changing Network Interface Parameters, >Baud Rate, >Data Bits, >Stop Bits, >Parity
View all Kyocera 9530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Using the Operation Panel 6 Press Z. Setting items (e.g., Baud Rate) are displayed in the message display. Press U or V to display each setting item. Definable baud rates: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 >Baud Rate 115200 Definable data bits: 7, 8 >Data Bits 7 Definable stop bits: 1, 2 >Stop Bits 1 Definable parity: None, Odd, Even, Ignore >Parity None Definable protocol: DTR(pos.)&XON, DTR(positive), DTR(negative), XON/ XOFF, ETX/ACK >Protocol DTR(pos.)&XON 7 Display the setting item to be changed and press [OK]. A blinking question mark (?) appears. 8 During setting, press U or V to display the desired item. 9 Press [OK]. Repeat steps 6 through 9 for each setting item to be changed. 10 Press [MENU]. The message display returns to Ready. Changing Network Interface Parameters This printer supports TCP/IP, NetWare and AppleTalk protocols. In addition, you can install the optional network interface card in the option interface slot. Using the operation panel, you can: • Activate or deactivate TCP/IP, NetWare and AppleTalk • Activate or deactivate DHCP • Enter IP address, subnet mask address, and default gateway address • Determine whether to print a network status page when the printer is turned on ADVANCED OPERATION GUIDE 2-37