Kyocera 9530DN Operation Guide - Page 158
H4: Parity, H5: Protocol logic, H6: Buffer nearly-full threshold, H8: Received-data buffer size
View all Kyocera 9530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Computer Interface H4: Parity Parameter value 0 1 2 3 None Odd Even Ignore Meaning The factory default setting is None (0 on the status printout). H5: Protocol logic Parameter value 0 1 2 3 4 5 Meaning Combination of 1 and 3 below DTR/DSR, positive logic DTR, negative logic XON/XOFF ETX/ACK XON/XOFF recognized only as protocol The factory default setting is 0. H6: Buffer nearly-full threshold This is a percentage from 0 to 99. The factory default setting is 90. H7: Buffer nearly-empty threshold This is a percentage from 0 to 99. The factory setting is 70. The factory default settings of the buffer nearly-full and nearly-empty thresholds (H6 and H7) are subject to change without notification. The gap between the nearly-full and nearly-empty thresholds allows the computer to send a fairly large amount of data in a continuous stream. H8: Received-data buffer size This is the size of the input buffer, specified in units of 10 Kbytes. The factory-set value is 6, meaning 60 Kbytes. 5-8 ADVANCED OPERATION GUIDE