Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 127
Installing the PC Card Director for OS/2 Warp, Insert the PCMCIA Installation Diskette for OS/2
View all Lenovo ThinkPad 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Installing the PC Card Director for OS/2 Warp Installing the PC Card Director for OS/2 Warp PC Card Director: Page 48. When installing an operating system, you need to install the following device drivers and software associated with PCMCIA before you can use the PC Cards: PC Card device drivers: - Card Services device driver - Socket Services device driver - PC Card Power Management device driver - PC Card Director utility PC Card client device drivers (only when PC Card Director does not support the PC Card) To install the PC Card Director: 1 Turn on the computer and start the operating system. 2 Insert the PCMCIA Installation Diskette for OS/2, Windows 95 into the diskette drive. 3 Open the OS/2 full screen command prompt. 4 Type A:\PCMINST2 at the OS/2 command prompt then press Enter. 5 Follow the instructions on the screen. 6 Click on OK when you have completed the installation. 7 After the installation is complete, close all applications, remove any diskette from the diskette drive, and restart the system. Note: Whenever you update the CONFIG.SYS file, refer to "Adding to the CONFIG.SYS File" on page 195. You have completed the installation of the PC Card Director for OS/2. If you want to continue to install all device drivers, continue with "Installing the ESS AudioDrive Support Software for OS/2 Warp" on page 110. Chapter 7. Installing Software 109