Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 135
Installing the PC Card Director for DOS 7.0, Insert the PCMCIA Installation Diskette
View all Lenovo ThinkPad 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Installing the PC Card Director for DOS 7.0 Installing the PC Card Director for DOS 7.0 Note: Do not install the Phoenix PCMCIA support in IBM PC DOS 7.0. PC Card Director: Page 48. Note: The PC Card client device driver is not part of the preinstalled software. Refer to the manual that came with the PC Card to install the device driver. When installing DOS, you need to install the following software to use the PC Cards: PC Card device drivers: - Card Services device driver - Socket Services device driver - Resource Map Utility device driver - PC Card Power Management device driver - PC Card Director utility PC Card client device drivers (only when PC Card Director does not support the PC Card) To install the PC Card Director: 1 Start DOS. 2 Insert the PCMCIA Installation Diskette for DOS/Windows into the diskette drive. 3 Type A: at the DOS command prompt and press Enter to go to the A: prompt. 4 Type PCMINSTD; then press Enter. Note: Whenever you update the CONFIG.SYS file, see page 195. 5 Follow the instructions on the screen. Default choices are already highlighted at the Selector screens. 6 After the installation is complete, remove any diskette from the diskette drive and restart the computer. You have completed the installation of the PC Card Director for DOS. Chapter 7. Installing Software 117