Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 75

Replacing the Battery Pack, Enter the hibernation mode by pressing the, combination.

Page 75 highlights

Replacing the Battery Pack Replacing the Battery Pack When the AC Adapter is connected, you can replace the battery pack anytime when it is low in power. Without the AC Adapter, the battery pack can be replaced when the computer power is off, or when the computer is in hibernation mode. To replace the battery pack during hibernation mode and without turning off the computer, follow these instructions. Important If you are using PC Cards, either connect the AC Adapter or stop the PC Card application and remove the PC Card before doing the following procedure. When you use an IBM PC Card that is listed on page 76, the computer does not enter hibernation mode. When replacing the battery pack, turn off the computer. Make sure you have created the hibernation file before doing the following steps. Otherwise, you cannot enter hibernation mode. (See page 73.) To create the hibernation file: Page 73. 1 Enter the hibernation mode by pressing the Fn+F12 key combination. 2 Close the LCD and turn the computer over. Chapter 4. Using Battery Power 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263

Replacing the Battery Pack
Replacing the Battery Pack
When the AC Adapter is connected, you can replace the battery
pack anytime when it is low in power.
Without the AC Adapter, the
battery pack can be replaced when the computer power is off, or
when the computer is in hibernation mode.
To replace the battery
pack during hibernation mode and without turning off the computer,
follow these instructions.
Important
If you are using PC Cards, either connect the AC Adapter or
stop the PC Card application and remove the PC Card before
doing the following procedure.
When you use an IBM PC Card that is listed on page 76, the
computer does not enter hibernation mode.
When replacing
the battery pack, turn off the computer.
Make sure you have created the hibernation file before doing
the following steps.
Otherwise, you cannot enter hibernation
mode.
(See page 73.)
To create the hibernation file:
Page 73.
1
Enter the hibernation mode by pressing the
Fn
+
F12
key
combination.
2
Close the LCD and turn the computer over.
Chapter 4.
Using Battery Power
57