Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 231

Using PS2 Commands Note: Create the hibernation file: Use this command before using other hibernation commands. HFILE C - Z | DELete - Note: Create the hibernation file using the HFILE command before using this command. Enter hibernation mode when the power switch is pressed: HSWITCH Enable | Disable Set the timer to enter hibernation mode after the specified number of minutes (xx): HTimer xx [AC | DC] Note: Set the power management mode to enter when a low-battery condition Create the hibernation file using the occurs: HFILE command before using the LB AC: Specifies battery mode when the AC Adapter is connected. H command. DC: Specifies ac mode when using battery power: LBattery Suspend | Hibernation - Note: This command is effective on the current power mode set by the PM command. Set the LCD off when there is no computer operation after the specified number of minutes (xx): LCd xx - Note: Set the resume timer: yyyy can be set from 1995 to 2093. ON at [yyyy/MM/DD] HH:MM:SS - | Clear Set the power mode: PMode High | Auto | Custom [AC | DC] Note: When the AC or DC option is not specified, this command is effective on the current power mode set by the PM command. Set the timer to enter suspend mode after the specified number of minutes (xx): AC: Specifies battery mode when the AC Adapter is connected. DC: Specifies ac mode when using battery power. POwer xx [AC | DC] Appendix C. Using PS2 Commands 213