Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 27
Position the contrast, and open the LCD
View all Lenovo ThinkPad 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Getting Started Turn on the computer: 4 Connect the AC Adapter to the computer as shown. (Connect 1 , 2 , and then 3 .) 5 Press the liquid crystal display (LCD) latch ( 1 ) and open the LCD ( 2 ). Position the LCD so that it is convenient for viewing. Note: The LCD opens up to 135°. Do not force the LCD to open flat (180°). 6 Position the contrast ( ) (for a DSTN display only) and the brightness control ( ) according to the figure. 7 Press the power switch to turn on the computer. 8 After a single beep, one of the following screens appears, confirming that the system is operating correctly. 1996 .12.31 Year Month Day 23:59:59 Hour Month Second Date and Time menu This screen instructs you to set the initial date and time. To set the date and time, see "Using Easy-Setup" on page 34. F1 F2 F10 Diskette and F1 prompts No operating system is installed in your computer. To install an operating system, see Chapter 7. Startup screen The preinstalled operating system (startup screen) appears. (The screen shown is an example of an operating system screen.) If one of the above screen does not appear, a failure might have occurred in the computer. See Chapter 8. Congratulations! You have successfully completed the basic setup of your computer. Chapter 1. Getting Started 9