Lenovo ThinkPad 560 Thinkpad 560 User's Guide - Page 77
Monitoring the Battery Status, Using the Battery Status Indicator
View all Lenovo ThinkPad 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using the Battery Status Indicator Monitoring the Battery Status Battery power conditions can be determined through the battery status indicator and the Fuel-Gauge program. Using the Battery Status Indicator The battery status indicator shows the current status of the battery pack (only when the battery is installed). Observe the battery status indicator ( ) and compare it with the status list below to determine the battery condition. Status Green Orange Blinking orange Condition Enough power remains for operation. The battery pack is being charged. (Only when the AC Adapter is connected.) Almost discharged (low battery). See "Low-Battery Condition" on page 60. Off The battery pack is not installed. The computer is turned off or is in suspend mode when the AC Adapter is not connected. Action Required - - Do either of the following actions within 1 minute: Connect the AC Adapter to the computer; leave the battery pack installed. Replace the battery pack with a fully charged spare. (See "Replacing the Battery Pack" on page 57.) You should take the necessary actions when the blinking orange condition occurs, before the computer enters suspend mode because of a low-battery condition. If suspend mode is caused by a low-battery condition, data in the memory can be lost. Do either of the following actions immediately: To continue your work with the AC Adapter: 1. Connect the AC Adapter to the computer. 2. Press the Fn key. To continue your work with a fully charged battery pack: 1. Connect the AC Adapter to the computer. 2. Replace the battery pack with a fully charged one. 3. Press the Fn key. 4. Disconnect the AC Adapter from the computer. Chapter 4. Using Battery Power 59