Lexmark T632 Service Manual - Page 129
Diagnostic aids, Diagnostics mode, Entering Diagnostic Mode:, Available tests
View all Lexmark T632 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4060-xxx 3. Diagnostic aids This chapter explains the tests and procedures to identify printer failures and verify repairs have corrected the problem. To run the printer diagnostic tests described in this chapter, you must put the printer in Diagnostic Mode. Diagnostics mode Entering Diagnostic Mode: 1. Turn the printer off. 2. Press and hold the Go and Return buttons. 3. Turn the printer on. 4. Release the buttons when Performing Self Test displays on the operator panel. Available tests The tests display on the operator panel in the order shown: • Print Registration • Print Tests • Hardware Tests • Duplex Tests (if installed) • Input Tray Tests • Output Bin Tests • Finisher Tests (if installed) • Base Sensor Test • Device Tests (displayed only if flash or disk option is installed) • Printer Setup • EP Factory Defaults • Error Log Exiting Diagnostics Mode Select Exit Diagnostics to exit the Diagnostics Mode and return to normal mode. Diagnostic aids 3-1