Lexmark T632 Service Manual - Page 47

4060-xxx Envelope feeder sub error codes First 6 bytes sub error code data (xx can be any value) Explanation 84 xx 17 There is an envelope in the feeder during POST. 84 xx 1D x1 x2 The envelope feeder pass thru sensor activated but never deactivated. (x1=media size, x2=media source) This error can be caused by an envelope over the pass thru sensor. Remove the envelope and try to feed an envelope. If the envelope stops over the pass thru sensor, try the following: • Enter the diagnostic test menu, select Input Tray Sensor Tests, select Envelope Feeder Sensor Test. • Check the envelope pass thru sensor to ensure it is operating correctly. If the sensor test fails, go to "Envelope feeder service check" on page 2-49. If the test passes, look for anything that might cause the envelope to stop over the sensor. 84 xx 1E x1 x2 An envelope never activated the envelope feeder pass thru sensor or the sensor never sensed the presence of an envelope. (x1=media size, x2=media source) • Make sure the envelope feeds to the pass thru sensor. • Check to see if the envelope actuates the pass thru sensor flag. Diagnostic information 2-13