Lexmark T632 Service Manual - Page 35
Diagnostic information, Start - error code check printer and cables
View all Lexmark T632 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Diagnostic information 4060-xxx Start CAUTION: Remove the power cord from the printer or wall outlet before you connect or disconnect any cable or electronic board or assembly for personal safety and to prevent damage to the printer. Use the handholds on the side of the printer. Make sure your fingers are not under the printer when you lift or set the printer down. Use the service error code, user status message, user error message, symptom table, service checks, and diagnostic aids in this chapter to determine the corrective action necessary to repair a malfunctioning printer. Service error codes are indicated by a three-digit error code. If a service error code displays, go to "Service error codes" on page 2-2. User status messages provide the user with information on the current status of the printer. Ready displays on the first line of the display unless Power Saver is invoked, and then Power Saver displays. If a user status message is displayed, go to "User status displays" on page 2-14. User error messages are indicated by a two or three-digit error code that provides the user with information that explains a problem with a print cartridge, paper jam, option, port, and so on. If a user error message displays, go to "User attendance messages" on page 2-19. If your machine completes the "Power-On Self Test (POST)" on page 2-34 without an error, and you have a symptom, go to "Symptom tables" on page 2-35. Locate your symptom and take the appropriate action. If a service error code appears while you are working on the machine, go to "Service error codes" on page 2-2 and take the indicated action for that error. Diagnostic information 2-1