Lexmark T632 Service Manual - Page 140

4060-xxx Feed to All Bins Test This test can be used to verify that the printer can feed media to the standard bin or any installed output options. No information will be printed on the test pages as the printhead is not turned on during the feed test. To run the Feed to all Bins Test: Select Feed to all Bins Test from the menu. • The media feeds from the default paper source. • The printer feeds a separate piece of media to the standard bin first, then it feeds a separate piece of media to each output bin installed in the following order: Sheets fed 1 2 3 4 5 6 7 8 Output bins Standard bin Bin #1 Bin #2 Bin #3 Bin #4 Bin #5 Bin #6 Bin #7 Sheets fed 9 10 11 12 13 14 15 16 Output bins Bin #8 Bin #9, Bin #10 Bin #10 Bin #9 Bin #8 Bin #7 Bin #6 Sheets fed 17 18 19 20 21 22 Output bins Bin #5 Bin #4 Bin #3 Bin #2 Bin #1 Standard bin The test is continuous until either the Return or Stop button is pressed. Output Bin Sensor Test This test is used to determine whether or not the output bin sensor is working correctly for the Standard Bin or the sensors are working for the output expander, high-capacity output stacker, 5-bin mailbox or StapleSmart finisher, if installed. To run the Output Bin Sensor Test for: Standard Bin 1. Select Output Bin Test from the menu. 2. Select Output Bin Tests - Sensor Tests. 3. Select Standard Bin from the menu. The following screen is displayed: Standard Bin F=OP F=Standard Bin's Bin Full Sensor 4. Once the screen is displayed, manually actuate the sensor flag to check the Bin Full Sensor. When the sensor is closed, CL displays, and when the sensor is open OP displays. 5. Select Return or Stop to exit the test. 3-12 Service Manual