Lexmark T632 Service Manual - Page 58
Input trays, service check on Envelope feeder, Output expander, Bin 1, or Bin 3
View all Lexmark T632 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4060-xxx User attendance messages (continued) Primary message Reattach Bins x-y Secondary message Reattach Envelope Feeder Reattach Output Bin x Explanation Bins x-y=Bins 1 to 5, Bins 2 to 6, or Bins 6 to 10 This messages displays for the following conditions: • The specified output bins may have been removed from the printer, possibly to clear a paper jam or to remove the option. • The option(s) may be attached to the printer but a communications problem may prevent the printer from detecting the option. For example, there may be a poor connection or a hardware failure. The following actions may be taken: • If the option was temporarily removed or not connected properly, reattach or reconnect it. • Press Go to execute a configuration change which notifies the printer the option has been hot unplugged (removed with the power on). Note: This action is not available if the printer is in Diagnostics Mode or running diagnostics. • If the device is experiencing a hardware problem, turn the printer off and on. If the message continues to be displayed, go to "Input tray(s) service check" on page 2-64. This messages displays for the following conditions: • The feeder may have been removed from the printer, possibly to clear a paper jam or to remove the option. • The feeder may be attached to the printer but a communications problem may prevent the printer from detecting the option. For example, there may be a poor connection or a hardware failure. The following actions may be taken: • If the option was temporarily removed or not connected properly, reattach or reconnect it. • Press Go to execute a configuration change which notifies the printer the option has been hot unplugged (removed with the power on). Note: This action is not available if the printer is in Diagnostics Mode or running diagnostics. • If the device is experiencing a hardware problem, turn the printer off and on. If the message continues to be displayed, go to "Envelope feeder service check" on page 2-49. Bin x=Bin 1, Bin 2, or Bin 3 This messages displays for the following conditions: • The specified output bin may have been removed from the printer, possibly to clear a paper jam or to remove the option. • The option may be attached to the printer but a communications problem may prevent the printer from detecting the option. For example, there may be a poor connection or a hardware failure. The following actions may be taken: • If the option was temporarily removed or not connected properly, reattach or reconnect it. • Press Go to execute a configuration change which notifies the printer the option has been hot unplugged (removed with the power on). Note: This action is not available if the printer is in Diagnostics Mode or running diagnostics. • If the device is experiencing a hardware problem, turn the printer off and on. If the message continues to be displayed, go to"Output expander service check" on page 2-72. 2-24 Service Manual