Lexmark T632 Service Manual - Page 24

4060-xxx Operating clearances Printer side Measurement Left and right side 12 in. (304.8 mm) Front 20 in. (508 mm) Rear 12 in. (304.8 mm) Top* 54 in. (1,371.6 mm) * Allow clearance above the printer front door clearance and for adding options, such as additional input drawers, output expander, high-capacity output stacker, or StapleSmart finisher. Power and electrical specifications Average nominal power requirements for the base printer configuration (110 volt). Power levels are shown in watts. Printing states Lexmark T630 Printing-average power Base model 429 W All options 457 W Idle-average power Power Saver on Power Saver off 12 W 81 W Printing-maximum current 110V 230V 8.8 A 4 A Lexmark T630n 432 W 460 W 15 W 84 W 8.8 A 4 A Lexmark T632 523 W 540 W 14 W 81 W 9.8 A 5 A Lexmark T632n 527 W 544 W 14 W 84 W 9.8 A 5 A Lexmark T634 584 W 608 W 15 W 86 W 10.2 A 5 A Lexmark T634n 590 W 614 W 16 W 87 W 10.2 A 5 A Note: Using a 220 to 110 power converter with the 110 volt printer is not recommended. Electrical specifications Low voltage model • 100 to 127 V ac at 50 to 60 Hz nominal • 99 to 137 V ac, extreme High voltage model • 220 to 240 V ac at 50 to 60 Hz nominal (not available in all countries) • 190 to 259 V ac, extreme 1-6 Service Manual