Magnavox MDR868H Owners Manual - Page 52
Audio, Select a Setting using, then press, Select a desired item using, press
View all Magnavox MDR868H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Still Mode Use this feature to set the type of still image when Playback is paused. Select "Auto" usually. 1 Select a Setting using [ K/ L ], then press [ OK ]. Your setting will be activated. Optimum resolution setting ("Field" or Auto "Frame") will be Selected. Field Frame Images in the still mode will be stabilized. Images in the still mode will be highly defined. Note(s) • Frame is 1 completed Video image made up of 2 fields (There are 30 frames per second of NTSC Video). Audio Dolby Digital Sets the Dolby Digital Audio output from HDMI/Digital Audio output. 1 Select a desired item using [ K/ L ], then press [ OK ]. Converts the Dolby Digital into PCM PCM (2 Channel). Auto Outputs from bitstream. If connected device does not support HDMI output, it will be converted to PCM. DRC (Dynamic Range Compression) This compression function will reduce the volume of the loudest sounds and amplify quieter sounds to make it easier to hear voices or raise the average sound level. 1 Select a desired item using [ K/ L ], then press [ OK ]. Old Sets DRC to On. Off Sets DRC to Off. Note(s) • This function is available for Dolby Digital. Not available for LPCM and MPEG Playback. Down Sampling Sets LPCM Digital Audio output format from Digital Audio output. 1 Select a desired item using [ K/ L ], then press [ OK ]. Output LPCM signal can be conberted to 48kHz, set this when a connected device does not support input over Old 48kHz. Off DVD-Video with an LPCM signal without copyright protection was Recorded and is Playing back, it will output 2ch Audio up to 96kHz. DTS Sets the DTS Audio from HDMI/Digital Audio output. 1 Select a desired item using [ K/ L ], then press [ OK ]. Outputs a DTS Audio.If this unit does not support DTS Audio, need to Old connect to a device that supports DTS. Off Mute DTS Audio. AAC Sets the AAC (Advanced Audio Coding) Audio from HDMI/ Digital Audio output. 1 Select a desired item using [ K/ L ], then press [ OK ]. PCM Outputs from PCM. Auto Outputs from bitstream. If connected device does not support HDMI output, it will be converted to PCM. EN - 52