Netgear FVS336G FVS336G Reference Manual - Page 116

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Configuring XAUTH for VPN Clients Once the XAUTH has been enabled, you must establish user accounts on the User Database to be authenticated against XAUTH, or you must enable a RADIUS-CHAP or RADIUS-PAP server. Note: You cannot modify an existing IKE policy to add XAUTH while the IKE policy is in use by a VPN policy. The VPN policy must be disabled before you can modify the IKE policy. To enable and configure XAUTH: 1. Select VPN > IPsec VPN from the main menu. 2. Click the IKE Policies tab. The IKE Policies screen is displayed. Figure 5-12 3. You can add XAUTH to an existing IKE Policy by clicking Edit adjacent to the policy to be modified or you can create a new IKE Policy incorporating XAUTH by clicking Add. 4. In the Extended Authentication section, choose the Authentication Type from the pulldown menu which will be used to verify user account information. Select • Edge Device to use this VPN firewall as a VPN concentrator where one or more gateway tunnels terminate. When this option is chosen, you will need to specify the authentication type to be used in verifying credentials of the remote VPN gateways. - User Database to verify against the VPN firewall's user database. Users must be added through the User Database screen (see "User Database Configuration" on page 5-21). 5-20 Virtual Private Networking Using IPsec v1.2, June 2008