Netgear FVS336G FVS336G Reference Manual - Page 126
General, Edit VPN Policy, Ping IP Address, Detection Period, Reconnect after failure count, Apply - wan no ping response
UPC - 606449052015
View all Netgear FVS336G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual 3. In the General menu frame of the Edit VPN Policy menu, locate the keepalive configuration settings, as shown in Figure 5-16: Figure 5-16 4. Click the Yes radio button to enable keepalive. 5. In the Ping IP Address boxes, enter an IP address on the remote LAN. This must be the address of a host that can respond to ICMP ping requests. 6. Enter the Detection Period to set the time between ICMP ping requests. The default is 10 seconds. 7. In Reconnect after failure count, set the number of consecutive missed responses that will be considered a tunnel connection failure. The default is 3 missed responses. When the FVS336G senses a tunnel connection failure, it forces a reestablishment of the tunnel. 8. Click Apply at the bottom of the menu. The Dead Peer Detection feature maintains the IKE SA by exchanging periodic messages with the remote VPN peer. To configure Dead Peer Detection on a configured IKE policy, follow these steps: 1. Select VPN from the main menu and Policies from the submenu. 2. Click the IKE Policies tab, then click the edit button next to the desired VPN policy. 5-30 Virtual Private Networking Using IPsec v1.2, June 2008