Netgear FVS336G FVS336G Reference Manual - Page 155
Allow Login only from Defined Addresses
UPC - 606449052015
View all Netgear FVS336G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual To restrict logging in based on IP address: 1. Select the by Source IP Address tab. The by Source IP Address screen will display. Figure 7-7 2. In the Defined Addresses Status section, select: • the Deny Login from Defined Addresses to deny logging in from the IP addresses that you will specify • the Allow Login only from Defined Addresses to allow logging in from the IP addresses that you will specify. 3. Click Apply. 4. To specify a single IP address, select IP Address from the Source Address Type pull-down menu and enter the IP address in the Network Address/IP address field. 5. To specify a subnet of IP addresses, select IP Network from the Source Address Type pull- down menu. Enter the network address and netmask length in the Network Address/IP address field. 6. Click Add to move the defined address to the Defined Addresses table. 7. Repeat these steps to add additional addresses or subnets. Managing Users, Authentication, and Certificates 7-7 v1.2, June 2008