Netgear FVS338 FVS338 Reference Manual - Page 135
Tools for Traffic Management, Administration, Changing Passwords and Settings - snmp
UPC - 606449037197
View all Netgear FVS338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual You will not change the WAN bandwidth used by changing any QoS priority settings. But you will change the mix of traffic through the WAN ports by granting some services a higher priority than others. The quality of a service is impacted by its QoS setting, however. See "Specifying Quality of Service (QoS) Priorities" on page 4-19 for the procedure on how to use this feature. Tools for Traffic Management The ProSafe VPN Firewall 50 includes several tools that can be used to monitor the traffic conditions of the firewall and control who has access to the Internet and the types of traffic they are allowed to have. See "Viewing Router Configuration and System Status" on page 6-23 for a discussion of the tools. Administration You can change the administrator and guest passwords and settings, configure an SNMP manager, backup settings and upgrade firmware, and enable remote management. Administrator access is read/write and guest access is read-only. Changing Passwords and Settings The default passwords for the firewall's Web Configuration Manager is password. Netgear recommends that you change this password to a more secure password. You can also configure a separate password for guests. To modify User or Admin settings: Router and Network Management 6-7 v1.0, March 2009