Netgear FVS338 FVS338 Reference Manual - Page 177
Web Filtering and Content Filtering Logs, PPTP Idle-Timeout Logs., PPP Authentication Logs.
UPC - 606449037197
View all Netgear FVS338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual PPTP Idle-Timeout Logs. Table B-9. System Logs: WAN Status, PPE, PPTP Idle-Timeout Message Explanation Nov 29 11:19:02 [FVS338] [pppd] Starting connection Nov 29 11:19:05 [FVS338] [pppd] CHAP authentication succeeded Nov 29 11:19:05 [FVS338] [pppd] local IP address 192.168.200.214 Nov 29 11:19:05 [FVS338] [pppd] remote IP address 192.168.200.1 Nov 29 11:19:05 [FVS338] [pppd] primary DNS address 202.153.32.2 Nov 29 11:19:05 [FVS338] [pppd] secondary DNS address 202.153.32.2 Nov 29 11:20:45 [FVS338] [pppd] No response to 10 echo-requests Nov 29 11:20:45 [FVS338] [pppd] Serial link appears to be disconnected. Nov 29 11:20:45 [FVS338] [pppd] Connect time 1.7 minutes. Nov 29 11:20:45 [FVS338] [pppd] Sent 520 bytes, received 80 bytes. Nov 29 11:20:51 [FVS338] [pppd] Connection terminated. Message 1: Starting PPP connection process Message 2: Message from server for authentication success Message 3: Local IP address assigned by the server. Message 4: Server side IP address. Message 5: primary DNS configured in WAN status page. Message 6: secondary DNS configured in WAN status page. Message 7: Sensing idle link Message 8: Idle link sensed Message 9: Data sent and received at the LAN side during the link was up. Message 10: PPP connection terminated after idle timeout Recommended Action To reconnect during idle mode, initiate traffic from the LAN side. PPP Authentication Logs. Table B-10. System Logs: WAN Status, PPE, PPP Authentication Message Explanation Recommended Action Nov 29 11:29:26 [FVS338] [pppd] Starting link Nov 29 11:29:29 [FVS338] [pppd] Remote message: Login incorrect Nov 29 11:29:29 [FVS338] [pppd] PAP authentication failed Nov 29 11:29:29 [FVS338] [pppd] Connection terminated.WAN2(DOWN)_ Starting link: Starting PPPoE connection process Remote message: Login incorrect: Message from PPPoE server for incorrect login PAP authentication failed: PPP authentication failed due to incorrect login Connection terminated: PPP connection terminated If authentication fails, then check the login/password and enter the correct one. Web Filtering and Content Filtering Logs To enable web keyword filtering logs, set value of keywordLog to 1 from CLI. Command to set this value from CLI: monitor/firewallLogs/logger/loggerConfig keywordLog 1 System Logs and Error Messages B-7 v1.0, March 2009