Netgear FVS338 FVS338 Reference Manual - Page 95
VPN > IPsec VPN > VPN Wizard, Gateway, Connection Name, Pre-shared Key, Remote and Local WAN IP - vpn ipsec
UPC - 606449037197
View all Netgear FVS338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual 1. Select VPN > IPsec VPN > VPN Wizard to display the VPN Wizard tab page. To view the wizard default settings, click the VPN Default values link. You can modify these settings after completing the wizard. • Gateway connection • Connection name • Pre-shared key • Remote and local WAN addresses • Remote LAN IP address and subnet Figure 5-3 2. Select Gateway as your connection type. 3. Create a Connection Name. Enter a descriptive name for the connection. This name used to help you manage the VPN settings; is not supplied to the remote VPN endpoint. 4. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway, or the remote VPN client. This key must be a minimum of 8 characters and should not exceed 49 characters. 5. Enter the Remote and Local WAN IP Addresses or Internet Names of the gateways which will connect. • Both the remote WAN address and your local WAN address are required. Virtual Private Networking 5-3 v1.0, March 2009