Nokia 6630 User Guide - Page 97

Tools Message text - Write a text to be sent in a text message when you reject a call. Image in video call - You can deny video sending when you receive a video call. Select a still image to be displayed instead of video. Automatic redial - Select On, and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialling. Summary after call - Activate this setting if you want the phone to briefly display the approximate duration of the last call. Speed dialling - Select On, and the numbers assigned to the speed dialling keys ( - ) can be dialled by pressing and holding the key. See also Speed dialling a phone number, p. '22'. Anykey answer - Select On, and you can answer an incoming call by briefly pressing any key, except , , , and . Line in use (network service) - This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Line change (network service) - To prevent line selection, select Line change→ Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Tip! To change the settings for call diverting, press and select Tools→ Settings→ Call divert. See Call diverting, p. '104'. Tip! To switch between the phone lines, press and hold in standby mode. Connection settings Data connections and access points Your phone supports packet data connections ( ), such as GPRS in the GSM network. See also Essential indicators, p. '15'. To establish a data connection, an access point is required. You can define different kinds of access points, such as: 97 Copyright © 2005 Nokia. All rights reserved.