Sharp AR M550N Installation Manual - Page 3
Transit and delivery, Unpacking - copier machine
View all Sharp AR M550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
(2) Dust If dust enters the machine, it may cause dirty copy and a paper jam, resulting in a shortened lifetime. (3) Direct rays of the sun If the machine is installed under the rays of the sun, the exterior of the machine may be discolored and abnormal copies may be produced. (4) Gases and chemicals Do not install the machine at a place where there are gases and chemicals. Especially be careful to avoid installation near a diazo-type copier, which produces ammonium gas. Copy quality may be adversely affected and a trouble may be caused. 2. Transit and delivery No. Content 1 Implements, facility, and manpower 2 Delivery Method Use a forklift. (If no forklift is available, manpower of four or more persons is required.) Transit must be made in packed condition. A. Implements, facility, and manpower It is recommendable to use a forklift for bringing in the machine for safety. If no forklift is available, manpower of four or more persons is required. The machine is considerably heavy, and requires safety precautions for delivery and installation. Transit of the machine must be made in packed condition to the installing place. B. Delivery Remove the packing materials prior to installation in the ofice environment. 3. Unpacking A. Unpacking procedure 1) Remove the PP band. 2) Remove the top case. 3) Remove the internal packing pads and the items packed together with the machine. (5) Vibration Avoid installation near a machine which produces vibrations. If vibrations are applied to the copier machine, copy images may be deflected and a trouble may be caused. 1 PP band 2 Top case 3 Pack case 4 Skid pad 5 Top pad R 6 Top pad L 7 Polyethylene bag 8 Bottom case unit 9 Accessory unit 10 Paper exit tray AS 11 Operation manual AR-M550/M620/M700 INSTALLATION MANUAL (AR-M550/M620/M700) 1 - 2