Sony DCR-IP220 Operating Instructions - Page 126
Recording a superimposed image to a tape, Superimposing a still image in a Memory Stick on an
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Superimposing a still image in a "Memory Stick" on an image - MEMORY MIX Recording a superimposed image to a tape Before operation •Insert a tape for recording into your camcorder. •Insert a "Memory Stick" recorded with still images into your camcorder. (1) Set the POWER switch to CAMERA. (2) Press FN and go to PAGE2. (3) Press MEM MIX. The last image recorded on the "Memory Stick" appears on the right lower part of the LCD screen. (4) Press -/+ on the right lower corner of the LCD screen to select the still image which you want to superimpose. - : To see the previous image + : To see the next image (5) Press a desired mode. The still image is superimposed on the moving picture. (6) Press -/+ on the left lower corner of the LCD screen to adjust the effect, then press OK to return to PAGE2. M. CHROM: Blue chroma key (only blue background portion) to extract a still image and superimpose it on a moving picture M. LUMI: Brightness level used when extracting a still image and superimposing it on a moving picture C. CHROM: Blue chroma key (only blue background portion) to extract a moving picture and superimpose it on a still image M. OVERLAP: No adjustment necessary The fewer bars there are on the LCD screen, the stronger the effect. (7) Press EXIT to return to FN. (8) Press START/STOP to start recording. 2 FN PAGE2 126 3,4 MEM M I X 5 MEM MIX OFF MCCAM OVER- OK LUMI LAP CAMCM MCCAM CHROM CHROM 100-0001 -+ Still image MEM MIX OFF OK - 6 + M. LUMI -+ MEM MIX OFF 100-0001 -+ OK - + M. LUMI -+ 100-0001 -+