Sony DCR-IP220 Operating Instructions - Page 99

Editing The micro Cassette Memory To return to FN Press EXIT. To erase the label you have made Select C in step 4. The last character is erased. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you take five minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to (CHG) OFF once and then to CAMERA again. After that, repeat the procedure from step 3. The power does not go off if you enter characters in VCR mode. If you set the write-protect tab of the tape to lock You cannot label the tape. Slide the write-protect tab to release the write protection. To erase the character Press T. The last character is erased. To enter a space Press t. To enter the character on the same button in succession Press t to move the cursor to the next position, and enter the character. Erasing all the data in micro Cassette Memory You can delete all the data in micro Cassette Memory at once. (1) Set the POWER switch to CAMERA or VCR. (2) Press FN to display PAGE1. (3) Press MENU, then select ERASE ALL in in the menu settings, then press EXEC (p. 183). (4) Press r/R to select OK, then press EXEC. "OK" changes to "EXECUTE." (5) Press r/R to select EXECUTE, then press EXEC. "ERASING" flashes on the LCD screen. Once deleting is completed, "COMPLETE" is displayed. To return to FN Press EXIT. To cancel deleting Select RETURN in step 4 or 5, then press EXEC. Note Once you delete all the data in the micro Cassette Memory, the following operations do not work: - MULTI-PICTURE SEARCH - TITLE SEARCH - DATE SEARCH Note on the ID number This item cannot be deleted. 99