Sony DCR-IP220 Operating Instructions - Page 57
When fading in, To cancel the fader function
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using the fader function (1) When fading in [a] In the recording standby mode, press FADER until the desired fader indicator flashes. When fading out [b] In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows: FADER t M. FADER t BOUNCE t MONOTONE t (no indicator) The last selected fader is indicated first of all. (2) Press START/STOP. The fader indicator stops flashing, then lights up. After the fade in/out is carried out, the fader indicator goes off and your camcorder automatically returns to the normal mode. 1 FADER FADER START/STOP Advanced Recording Operations To cancel the fader function Before pressing START/STOP, press FADER until the indicator disappears. Note You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions: - Super NightShot - Color Slow Shutter - Recording still images - Digital effect - Memory overlap of MEMORY MIX While using the BOUNCE function, you cannot use the following functions: - Zoom - Picture effect - PROGRAM AE - Exposure - Flexible Spot Meter - Focus Note on the BOUNCE function You cannot select the BOUNCE function in the following mode or functions: - D ZOOM is activated in the menu settings. - Wide mode - Picture effect - PROGRAM AE When the POWER switch is set to MEMORY You cannot use the fader function. 57