Sony DCR-IP220 Operating Instructions - Page 44
Various settings, When you use the data code function, bars -- -- -- appear if, Data code
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Playing back a tape Various settings Various settings shows your camcorder's recording information at the time of recording. In the recording mode, the various settings will not be displayed. When you use the data code function, bars (-- -- --) appear if: - A blank portion of the tape is being played back. - The tape is unreadable due to tape damage or noise. - The tape was recorded by a camcorder without the date and time set. Data code When you connect your camcorder to a TV, the data code also appears on the TV screen. Remaining battery time indicator during playback The indicator shows the approximate continuous playback time. The indicator may not be correct, depending on the conditions in which you are playing back. When you close the LCD panel and open it again, it takes about one minute for the correct remaining battery time to be displayed. 44