Sony DCR-IP220 Operating Instructions - Page 192
Self-diagnosis display
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Self-diagnosis display Your camcorder has a self-diagnosis display function. This function displays the current condition of your camcorder as a five-digit code (a combination of a letter and figures) on the LCD screen. If a fivedigit code is displayed, check the following code chart. The last two digits (indicated by ss) will differ depending on the state of your camcorder. LCD screen or Viewfinder C:21:00 Self-diagnosis display • C:ss:ss You can service your camcorder yourself. • E:ss:ss Contact your Sony dealer or local authorized Sony facility. Five-digit display C:04:ss C:21:ss C:22:ss C:31:ss C:32:ss E:20:ss E:61:ss E:62:ss Cause and/or Corrective Actions • You are using a battery pack that is not an "InfoLITHIUM" battery pack. c Use an "InfoLITHIUM" battery pack (p. 196). • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize (p. 201). • The video heads are dirty. c Clean the heads using the cleaning cassette (optional) (p. 202). • A malfunction other than the above that you can service has occurred. c Remove the cassette and insert it again, then operate your camcorder. Do not perform this operation if moisture starts to condense (p. 201). c Disconnect the power cord of the AC power adaptor or take out the battery pack. After reconnecting the power source, operate your camcorder. • A malfunction that you cannot service has occurred. c Contact your Sony dealer or local authorized Sony service facility and inform them of the 5-digit code. (example: E:61:10) If you are unable to rectify the problem even if you try corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. 192