Sony DCR-IP220 Operating Instructions - Page 188
Types of trouble and how to correct trouble, In the recording and playback modes
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Types of trouble and how to correct trouble In the recording and playback modes Symptom Cause and/or Corrective Actions The POWER switch does not turn on. • The battery pack is not inserted, or is dead or nearly dead. c Insert a charged battery pack (p. 17, 18). • The AC power adaptor is not connected to a wall outlet. c Connect the AC power adaptor to a wall outlet (p. 21). The battery pack is quickly discharged. • The temperature of the environment is too low. • The battery pack is not fully charged. c Charge the battery pack fully again (p. 18). • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack (p. 17). The battery remaining indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack (p. 17). • The battery is exhausted. c Use a charged battery pack (p. 17, 18). • A deviation has occurred in the remaining time. c Charge the battery pack fully again so that the indication on the battery remaining indicator is correct (p. 18). The power goes off although the battery remaining indicator indicates that the battery pack has enough power to operate. • A deviation has occurred in the remaining battery time. c Charge the battery pack fully again so that the indication on the battery remaining indicator is correct (p. 18). The cassette cannot be removed from the holder. • The power source is disconnected. c Connect it firmly (p. 21). • The battery is exhausted. c Use a charged battery pack (p. 17, 18). The % and Z indicators flash and no functions except for cassette ejection work. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize (p. 201). Remaining tape indicator is not displayed. • The q REMAIN is set to AUTO in the menu settings. c Set it to ON to always display the remaining tape indicator (p. 183). 188