Sony DCR-IP220 Operating Instructions - Page 190
Types of trouble and how to correct trouble, Others - a v connecting cable for dcr ip220e
View all Sony DCR-IP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Types of trouble and how to correct trouble Others Symptom Cause and/or Corrective Actions A title is not recorded. • 20 titles have been recorded. c Erase unnecessary title (p. 93). • The cassette is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible (p. 25). • The tape has a blank portion in the recorded portion. c Superimpose the title to the recorded position (p. 91). A cassette label is not recorded. • The tape is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible (p. 25). The Remote Commander supplied with your camcorder does not work. • COMMANDER is set to OFF in the menu settings. c Set it to ON (p. 185). • Something is blocking the infrared rays. c Remove the obstacle. • The batteries are inserted in the battery holder with the + - polarities incorrectly matching the + - marks. c Insert the batteries with the correct polarity (p. 217). • The batteries are dead. c Insert new ones (p. 217). The picture from a TV or VCR does not appear even when your camcorder is connected to the outputs on the TV or VCR. • DISPLAY is set to V-OUT/LCD in the menu settings. c Set it to LCD (p. 185). • VIDEOINPUT is not set correctly in the menu settings. c Set it to the appropriate setting (p. 180). Dubbing cannot be made when using • VIDEOINPUT is not set correctly in the menu settings. the A/V connecting cable. c Set it to the appropriate setting. The melody or beep sounds for five seconds. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize (p. 201). • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. No function works though the power is on. • Disconnect the AC power adaptor from a wall outlet or take out the battery, then reconnect it in about one minute. Turn the power on. If the functions still do not work, press RESET using a sharp-pointed object. (If you press RESET, all the settings (DCR-IP220: except the NETWORK mode settings) including the date and time return to the default) (p. 211). 190