Sony HVR Z1U Operating Instructions - Page 103
Dubbing/Editing, To cancel the user bits setting, To reset the user bits
![]() |
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
5 Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial. 6 Select the first 2 digits by turning the SEL/PUSH EXEC dial, then press the dial. 7 Repeat step 6 to set up the other digits. 8 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial. 9 Press MENU to hide the menu screen. Switching the time value To cancel the user bits setting Select [CANCEL] in step 8. To reset the user bits Select [RESET] in step 5. To set the user bits to the real time clock Select the (TC/UB SET) menu, [UB TIME REC], then [ON]. b Note • User-bit values appear at every 3 frames for the tape recorded in the HDV format. • When you input HDV format signal via i.LINK connection, the user-bits are copied, however, they are not regenerated. Press TC/U-BIT. Each time you press the button, the time value changes between the time code and user bits. TC: 00:00:00:00 or 00:00.00:00 U-BIT: 00 00 00 00 b Note • The time code and user bits cannot be displayed properly if the tape does not have time code and/or user bits recordings or if the time code was recorded using a non-compatible method. • When you input HDV format signal via i.LINK connection, the user-bits of the input video are written on this camera, however, they are not displayed during dubbing. Dubbing/Editing Dubbing/Editing 103
![](/manual_guide/products/sony-hvr-z1u-operating-instructions-3971101/103.png)