Sony HVR Z1U Operating Instructions - Page 51
Displaying the date/time and camera settings data - Data code
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Displaying the date/time and camera settings data - Data code During playback, you can view the date/time data and the camera settings data that are automatically recorded while recording pictures on a tape. 1 Set the POWER switch to VCR. 2 Press DATA CODE on the camcorder or Remote Commander during playback or playback pause. Each time you press the button, the indicators appear in turn as follows: Date/time t Camera settings data t (no display) To hide the camera settings data Select the (OTHERS) menu, [DATA CODE], then [DATE] (p. 80). Each time you press DATA CODE, the date/ time indicator turns on and off. Displaying the video information - Status check You can check the setup value of the following items. • Audio setup such as audio mix (p. 64) • Output signal setup ([VCR HDV/DV], etc.) (p. 70) • Functions assigned to the ASSIGN buttons (p. 86) Camera settings data display In the date/time data display, the date and time is displayed in the same area. If you record the picture without setting the clock and [--:--:--] will appear. 6 0min HDV1080i 00:00:00:00 6 0min Playback AUTO F 1 . 7 6 dB 1 0 0 A SteadyShot off B Exposure C Aperture value If you manually adjust the aperture value to the maximum, appears. D Gain E Shutter speed F White balance appears when pictures recorded by using the shot transition function are played back. 1 Press STATUS CHECK. 2 Turn the SEL/PUSH EXEC dial to display the desired item. Each time you turn the dial, the items appear in the following order: AUIDO t OUTPUT t ASSIGN To turn off the video information Press STATUS CHECK. Playback 51