Sony HVR Z1U Operating Instructions - Page 64

Using the (AUDIO SET) menu - INT MIC SET/XLR SET, etc. You can select the items listed below on the AUDIO SET menu. For details on how to select items, see "Selecting menu items" (p. 57). The default settings are marked with G. The indicators in parentheses appear when the setting is selected. The settings you can adjust vary depending on the power mode of your camcorder. The screen shows the items you can operate at the moment. Unavailable items will be grayed out. AUD I O SET STBY RETURN AUD I O MON I CH1,CH2 AUD I O OUTPUT AUD I O MODE AUD I O LOCK AUD I O L I M I T M I C NR M I C SELECT [ MENU ] : END AUDIO MONI You can check the sound from headphones or the camcorder speaker by selecting either of them. GCH1,CH2 CH1 CH2 CH1+CH2 Select to listen to the CH1 and CH2 sounds separately in the L and R channels. However, you will hear the CH1 and CH2 sounds mixed from your camcorder speaker. Select to listen to the CH1 sound in channels L and R. Select to listen to the CH2 sound in channels L and R. Select to listen to the CH1 and CH2 sounds synthesized in channels L and R. AUDIO MIX You can select the sound to be output when playing back a tape on which sounds were added afterwards (p. 98). GCH1,CH2 MIX CH3,CH4 Select to output only the originally recorded sound (CH1, CH2). Select to synthesize and output the originally recorded sound (CH1, CH2) and the sound added afterwards (CH3, CH4). Select to output only the sound (CH3, CH4) added afterwards. b Note • You cannot select this item when playing back a tape recorded with [AUDIO MODE] set to [FS48K]. AUDIO OUTPUT You can select the audio output level to speakers, etc. 1Vrms G2Vrms Select to set the audio output level to 1 Vrms/FS. Select to set the audio output level to 2 Vrms/FS. 64 Using the Menu