Sony HVR Z1U Operating Instructions - Page 92
Dubbing to another tape, Start the playback on your camcorder - power supply
![]() |
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Dubbing to another tape 1 Connect the recording device to your camcorder (p. 89). 2 Prepare the recording device. • Insert a cassette for recording. • If the recording device has an input selector, set it to the input mode. 3 Prepare your camcorder for playback. • Insert the recorded cassette. • Set the POWER switch to VCR. 4 Start the playback on your camcorder, and record it on the VCR. Refer to the operating instructions supplied with your VCR for details. 5 When the dubbing is finished, stop your camcorder and the VCR. b Note • When you use an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording it to a VCR. • Pictures recorded in the HDV format are not output from the HDV/DV jack during playback pause or in playback modes other than normal playback. • When you use an i.LINK cable, you cannot record the picture and sound separately. z Tip • The i.LINK lamp, HDV or DV, on the HDV/DV jack holder will light up and indicate the format of the output signal when you use an i.LINK cable. • When you use an i.LINK cable, the video and sound signals are transmitted digitally, producing high quality pictures. 92 Dubbing/Editing
![](/manual_guide/products/sony-hvr-z1u-operating-instructions-3971101/92.png)