Sony HVR Z1U Operating Instructions - Page 82
i/60i SEL, Select [YES] by turning the SEL/PUSH EXEC dial, then press the dial., dial.
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
50i/60i SEL You can switch the system, 1080/60i (NTSC system) or 1080/50i (PAL system), used by your camcorder to record. It is set to 60i in the default setting. 1 Select [YES] by turning the SEL/PUSH EXEC dial, then press the dial. 120min 00:00:00:00 5 0 i / 6 0 i SEL Change to 50i? Reboots after change. YES NO 2 Select [YES] again by turning the SEL/PUSH EXEC dial, then press the dial. The screen goes off, the system is switched. z Tip • You can switch to 50i (PAL) system also when recording in the DVCAM (DV) format. 82 Using the Menu
Using the Menu
82
50i/60i SEL
You can switch the system, 1080/60i (NTSC system) or 1080/50i (PAL system),
used by your camcorder to record. It is set to 60i in the default setting.
1
Select [YES] by turning the SEL/PUSH EXEC dial, then press the dial.
2
Select [YES] again by turning the SEL/PUSH EXEC dial, then press the
dial.
The screen goes off, the system is switched.
z
Tip
•
You can switch to 50i (PAL) system also when recording in the DVCAM (DV) format.
00:00:00:00
120
min
50i/60i
SEL
YES
NO
Change to 50i?
Reboots
after change.