Sony HVR Z1U Operating Instructions - Page 74
Down Convert, Audio/video
![]() |
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
• Disconnect the i.LINK cable before setting [i.LINK CONV]. Otherwise, the connected video device may not be able to recognize the video signal from this camcorder. DOWN CONVERT Select the picture format to be output when you play back the tape recorded in the HDV specification. This setting is effective for the following output: - COMPONENT OUTPUT (at 480p/480i and 576p/576i) - S VIDEO - AUDIO/VIDEO - i.LINK (when [HDVtDV CONV] is set to [ON] in [i.LINK CONV]) GSQUEEZE Select to output signals to a 16:9 wide TV or a TV compatible with 16:9 wide mode. Pictures will appear as follows: On a 16:9 wide TV On a TV compatible with 16:9 wide mode LETTER BOX Select to output signals to a TV that is not compatible with 16:9 wide mode. Pictures will appear as follows: On a 4:3 standard TV EDGE CROP Select to display the center of the picture in 4:3 aspect ratio by cropping the both sides of the picture. Pictures will appear as follows: On a 4:3 standard TV z Tip • When you view pictures that were recorded in the DVCAM (DV) format with [DV WIDE REC] set to [ON] on a 4:3 standard TV, pictures may appear as they are in height, but are compressed in width depending on the TV. If you view the recorded pictures on such type of 4:3 standard TV, set [DV WIDE REC] to [OFF] before recording. 74 Using the Menu
![](/manual_guide/products/sony-hvr-z1u-operating-instructions-3971101/74.png)