Sony HVR Z1U Operating Instructions - Page 59

Using the Menu SHOT TRANS Select this setting to set the transition duration, time, and start timer. See page 40 for details on using the shot transition function. b Note • Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by pressing the button repeatedly (p. 40). TRANS TIME Select the time that takes to make a transition from the current setting to the selected setting. Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the default setting. TRANS CURVE Select the transition curve. The figures below show the transition curve of each mode. *1: parameter level *2: transition of time LINEAR Select to make the transition linearly. *1 *2 GSOFT STOP Select to make the transition slowly at the end. *1 *2 SOFT TRANS Select to make the transition slowly at the beginning and end, and linearly in between. *1 *2 START TIMER GOFF 5 sec 10 sec 20 sec Select to start the shot transition immediately. Select to start the shot transition after 5 seconds. Select to start the shot transition after 10 seconds. Select to start the shot transition after 20 seconds. ,continued Using the Menu 59