Sony HVR Z1U Operating Instructions - Page 56
Searching for a recording start point - Index search, Press SEARCH MODE on the Remote
UPC - 027242668799
View all Sony HVR Z1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Searching for a recording start point - Index search You can locate the point where an index signal is recorded (p. 44). SEARCH MODE . / > STOP 1 Set the POWER switch to VCR. 2 Press SEARCH MODE on the Remote Commander repeatedly to select [INDEX SEARCH]. 3 Press . (previous)/> (next) on the Remote Commander to select an index point. You can select the previous or the next index signal of the present point on the tape. Playback starts automatically from the point where the index signal is recorded. To cancel the operation Press STOP on the Remote Commander. b Note • If 1 day's recording is less than 2 minutes, your camcorder may not accurately find the index point. • The Index search will not function correctly when there is a blank section between recorded sections on the tape. 56 Playback