TP-Link TL-WA7210N User Guide - Page 15
The Rear Panel - 150mbps
View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch View from left to right, the parts are explained below. : This is where you can connect an outside antenna. For this AP, the antenna is built inside, and usually there is not necessary to connect an outside one. LAN: This port is used to connect to the POE port of the provided Power Injector. RESET: There are two ways to reset the AP's factory defaults: • Use the Factory Defaults function on System Tools -> Factory Defaults page in the AP's Web-based Utility. • Use the Factory Default Reset button: Press and hold the RESET button for at least 5 seconds, and then the AP reboots after the LED at the rightmost in Figure 1-1 flashes. Note: Ensure the AP is powered on before it restarts completely. 5