TP-Link TL-WA7210N User Guide - Page 43
Mac Address of Remote AP - problems
View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide Mac Address of Remote AP: - The Mac Address of the AP your Device is going to connect to as a client. You can also use the survey function to select the BSSID to join. Survey - Click this button, you can search the APs. Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE will pop up. Select I agree to these terms of use, and click Accept to continue. Note Dialog Note: Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference. Transmission Power - The available options of transmission power are determined by the region selected. Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Wireless Security Mode - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type. WPA/WPA2-PSK - Select WPA based on pre-shared passphrase. WEP - Select WEP based on none pre-shared passphrase. No Security - The wireless security function is disabled. The wireless stations will be able to connect the Device without encryption. Auth Type - This option should be chosen if the Security Mode is WEP. It indicates the authorization type of the Root AP. Key Format - This option should be chosen if the Security Mode is WEP. It indicates the format of the WEP key. WEP Index - This option should be chosen if the Security Mode is WEP. It indicates the index of the WEP key. Wireless Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank. 33