TP-Link TL-WA7210N User Guide - Page 92
Wireless Settings
View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide be able to configure the corresponding function. The detailed explanations for each submenu are provided below. Figure 5-15 Wireless menu 5.7.1 Wireless Settings Choose menu Wireless > Wireless Settings, and then you can configure the basic settings for the wireless network on the Wireless Settings page(Figure 5-16 & Figure 5-17). Note: There are differences between the Wireless Settings page in AP Router mode and that in AP Client Router mode, as shown in Figure 5-16 & Figure 5-17. 1. Wireless settings in AP Router mode Figure 5-16 Wireless Settings in AP Router mode Wireless Network Name - Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_xxxxxx (xxxxxx indicates the last unique six characters of each Device's MAC address), which can ensure your wireless network security. But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, MYSSID is NOT the same as MySsid. Region- Select your region from the pull-down list. This field specifies the region where the wireless function of the Device can be used. It may be illegal to use the wireless function of 82